How to Replace a Lamp Socket

Save
Next Video:
How to Replace a Lamp Socket....5

Replacing a lamp socket should be approached with caution due to the presence of electricity. Replace a lamp socket with help from a home contractor in this free video clip.

Part of the Video Series: Home Help
Promoted By Zergnet

Comments

Video Transcript

Hello, my name is David Geeting, and I own a company called By the Book Construction in Camarillo, California, and today I am going to show you the right process to change a light socket in a lamp. The only tools you're going to need for this project are a screwdriver and maybe a roll of electrical tape. Okay we're going to replace the socket on this lamp. This lamp is equipped with a three way switch which is for the dimmable bulb or it goes through three different wattages as you turn it. After time these will wear out. Because we're using a fluorescent bulb now we can go to a single switch that's a little bit more durable and it's really all this lamp needs. Okay, the first thing we need to do is disassemble the lamp and we're going to remove the shade. Now underneath this is called the bow. It has these little retainers and you want to hold those up and then squeeze the bow and it will pop right out. Now we're at our socket. These sockets are just crimped in there so you just wiggle it a little bit and it will pull out, the top cap comes off. Okay now that we're removed all the lamp hardware and we've exposed the wires to the socket, we can cut off this socket. Now this socket was put on by the manufacturer as a one time pressed fitting where the normal sockets come with screw fittings which we are going to attach our wires to the new one with and now that we've cut off our old switch, we have to strip these wires back to accept the new switch, use our wire snippers and cut the insulation from around each wire, just cut all the way around it and pull it and it will slide right off. And we want to take and twist those up so they're nice and solid. Now we're going to install our new socket. You take one of the wires on one of the terminals. There's two terminals on this. One is gold, one is silver. It makes no difference which wire you connect which one to. You are going to wrap it around in a clockwise motion and then tighten the screw. Now we're going to do the same on the other side, wrap it around in a clockwise motion and tighten that screw. Now we're ready to put our cover on and snap it back down into the socket base. Now that we've put on the new light socket we're going to test it by putting in a bulb. We've already plugged it in and we successfully completed our light socket replacement. My name is David Geeting from Camarillo, California. I own a company called By the Book Construction, and I have just shown you the proper process to replace a lamp socket.

Featured

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!