How to Adjust the Water Level Adjustment Clip in a Toilet

Save

Adjusting the water level adjustment clip in a toilet is something that you're going to want to do very carefully. Adjust the water level adjustment clip in a toilet with help from a Foreman for Lighty Contractors in this free video clip.

Promoted By Zergnet

Comments

Video Transcript

Hello, everyone. I'm Joshua Clement with Lighty Contractors, and today I'm gonna show you how to adjust the water level adjustment clip. I'm gonna show you two different types of systems that fill the back of the tank. First of all, you wanna remove the back here, and I'll also be using a Phillips head screwdriver. And, this system here, the water level adjustment is actually controlled by a screw that presses down on the clip inside. To adjust it to allow more water in, you simply loosen the screw. To adjust it so less water comes in, you tighten it, which allows the float to kick it off sooner as it pops up. Now, here's a different model with a fill valve. With this, it's pretty much the same idea. You have the screw on top which adjusts the level here, and all you do is take your Phillips head screwdriver, put it in there, adjust it, more water comes out, tighten it, less water comes out. That's all there is to it. I'm Joshua Clement with Lighty Contractors and you just learned to adjust the fill valve clip in your toilet. Thanks for watching and good luck with your next project.

Featured

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!