How to Remove Semi-Transparent Concrete Stains

Save

Semi-transparent stain is a chemical concrete colorant. It seeps into the porous surface of the concrete to color it, but still allows the texture of the concrete to show through the stain. If you want to paint or recolor your concrete, you will need to remove the existing stain. A chemical concrete stripper will open the pores of the concrete surface and remove the old semi-transparent stain.

Things You'll Need

  • Broom
  • Water
  • Acid-resistant gloves
  • Goggles
  • Concrete stripper
  • Paint stirrer
  • Paint tray
  • Paintbrush
  • Pressure washer

Wait until the temperature is between 50 and 80 degrees Fahrenheit. Sweep the concrete surface to remove any dirt or debris. Spray any plants growing nearby with water so the chemicals will run off them if they come into contact.

Put on acid-resistant gloves and goggles. Stir the concrete stripper with a paint stirrer and pour it into a paint tray.

Paint a thick, even layer of the stripper onto the concrete with a paintbrush. Overlap each stroke so there is no missed section.

Let the stripper sit for one to six hours, or however long the package directions recommend. The stain will visibly lift out of the concrete. If the stripper dries out during the lifting process, paint more onto the dry spot.

Use a pressure washer to remove the stripped stain and the stripper. Start at the top of the concrete surface and work down. Rinse the concrete two more times to ensure that all the stripper is gone.

References

Promoted By Zergnet

Comments

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!