Pool Skimmer Not Sucking to Full Potential

A swimming pool is an enjoyable addition to your home, especially during the hot summer months. A pool skimmer is a cleaning tool that hangs on the side of the pool and catches falling debris before it sinks to the bottom. You also use the pool skimmer as a filter when regularly vacuuming a pool. If the skimmer is not sucking to full potential, it may be cracked or clogged with debris.

Things You'll Need

  • Pool putty
  • Drain King Pool Primer No. 345
  • Water hose

Video of the Day

Inspect the sides of your pool skimmer for cracks. Repair any cracks by filling them with pool putty. Cracks are caused by freezing weather or shifting pressure in the ground and can impact the performance of the pool skimmer.

Attach a Drain King to the end of a water hose. The Drain King No. 345 is sized to fit swimming pool lines and remove clogs from skimmers.

Insert the Drain King into the filter pump pipe. This will force water back towards the clogged pool skimmer.

Turn on the water hose and allow the Drain King to expand inside the pipe. This causes pressure inside the water line that breaks up clogs and forces debris out of the skimmer.

Repeat the process until the skimmer becomes unblocked. This allows the skimmer to once again perform at full potential.

Tips & Warnings

  • Keep your pool pump and filter maintained regularly to improve pool skimmer performance.


Promoted By Zergnet

You May Also Like

Is DIY in your DNA? Become part of our maker community.