How to Clean Pool Salt Chlorine Generators

Pool salt chlorine generators use salt to create chlorine in your pool. The water passes through the generator and the salt in the water turns it into hypochlorous acid, which is what your water turns in to when you add normal pool chlorine to it. Salt chlorine generators, however, do not have a harsh smell of chlorine. The amount of salt in the pool is too low for most people to even notice. Neither the taste nor the clearness of your water will be affected. Cleaning the salt chlorine generators is only needed once a year.

Things You'll Need

  • Plastic brush
  • Hose
  • Muriatic acid
  • Bucket

Video of the Day

Turn off the pump to your pool.

Open the top of the salt chlorine generator and remove the electrolytic cell from the housing.

Brush off the cell with the plastic brush to remove any build up and hose it off gently.

Add 1/3 cup muriatic acid to 1 gallon of water and soak the cell in the solution for 15 to 20 minutes to remove any calcium build up. Rinse the cell off thoroughly and return it to the salt chlorine generator housing.

Place the lid back on the salt chlorine generator and turn the pump back on.


Promoted By Zergnet
Is DIY in your DNA? Become part of our maker community.