Halloween would not be complete without a carved pumpkin. These days, popular designs of pumpkins can take inspiration from a hit movie or a notorious character played by a famous actor or actress. One current design for a carved pumpkin is the infamous Joker, as played by the late Heath Ledger in the movie “Dark Knight.” Since Joker’s persona is enigmatic and dark, a lot of people find it scary and fascinating. A Heath Ledger Joker is a great idea for a pumpkin carving design.
Things You'll Need
- Heath Ledger Joker stencil
- Carving saw
- Sticky tape
- Transfer tool
- Small knife
- Petroleum jelly
Print out a Heath Ledger Joker stencil for your pumpkin design. Most websites sell a Heath Ledger Joker stencil design at an affordable price. However if you want to get it for free, you can go to Pinkraygun.com. This site allows you to download a PDF file of the Joker stencil design along with some instructions on how to carve it.
Prepare your pumpkin for carving. This means that the top of the pumpkin has already been cut out and the insides of the pumpkin has been completely removed. Since you have already printed out your design, make sure that you choose the proper size of pumpkin that can fit your design.
Cut the unnecessary edges of the paper, but leave 1/2 inch of the paper from the stencil for the sticky tape. Stick the stencil paper on the side of the pumpkin where you will carve the design. Make sure you attach the upper part of your stencil first, followed by the bottom and then the sides. Avoid getting your stencil wrinkled.
Use the transfer tool to transfer the figure of your design. Start pressing your transfer tool from the center of your stencil, gradually working your way out. A transfer tool can be anything from a nail or an ice pick with which you can punch small holes through the paper onto your pumpkin. Push the transfer tool gently enough to make holes through the paper to the skin of the pumpkin. If you press too hard, the design and the pumpkin will be ruined. Also, make the holes close to each other.
Remove the taped stencil paper and carve your design using the carving saw. Again, start from the center, pushing the tip of the blade to a hole and saw it off using a back and forth motion. Keep in mind that you are using a carving saw, not a carving knife, so maintaining a back and forth motion is important.
Get rid of the pieces that have been cut. Gently clean the edges inside the pumpkin using a small knife. This will make your lantern look neat and clean. Apply petroleum jelly on the edges of your design, especially on the edges inside. The petroleum jelly will help preserve not only your design but also the life of your pumpkin.