DIY Plastic Coating

Save
The rubberized plastic coating on pliers can be achieved using tool dip.
The rubberized plastic coating on pliers can be achieved using tool dip. (Image: pliers image by Jim Mills from Fotolia.com)

Tool dip allows you to create a custom rubberized plastic coating for hard objects and surfaces. Tool dip can be used for many projects, but it is most commonly used to build a layer of soft plastic coating onto tool handles, making them more comfortable to hold. It is sold in a variety of colors, including a customizable version where you can add drops of dye to achieve the desired color. It is available at hardware stores.

Things You'll Need

  • Tool dip
  • Gloves
  • Respirator
  • Goggles
  • Stirring Stick

Put on safety goggles and gloves. Tool dip emits fumes and a strong chemical odor, so a respirator is recommended. You should work in a well ventilated area, preferably outdoors. Tool dip can be messy, so you may want to protect your workspace.

Open the can of tool dip, and stir with a stirring stick to ensure proper consistency.

Dip object that you wish to coat directly into the can of tool dip. Take your time to avoid creating air bubbles. You should try to dip the tool 1 inch per every five seconds.

Apply multiple coats of tool dip to achieve a thicker coating. Tie a string to the top end of your object, and hang it to dry. Avoid touching your object to the ground and creating a flat spot in the coating. You may recoat after 30 seconds.

Leave your object to dry for at least four hours. Ideally allow your object to dry overnight before use. There may be a chemical smell to the coating for several days, but eventually this will dissipate.

References

Promoted By Zergnet

Comments

You May Also Like

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!