How to Make Dread Beads

Save

Make decorative beads to add an individual touch to your dreads. Polymer clay is a great medium for crafting these dread beads. Forming clay around a mandrel and a wire frame provides support and makes for a stronger bead. Polymer clay is user friendly and can be fired without a special kiln. There are several brands of polymer clay, which come in a variety of colors, available at craft, art supply and bead stores.

Things You'll Need

  • Polymer clay
  • Mandrel, such as a pen or pencil
  • 20-gauge craft wire, approximately 8 inches
  • Wire cutters
  • Round-nose pliers
  • Florist wire
  • Glass or metal baking dish

Cut an 8-inch piece of wire with wire cutters. Wrap the wire around the mandrel. Keep the wraps even and about 3mm apart. If you want to attach smaller dangles after you fire the polymer clay, create a wire loop with round-nose pliers that extends past the end of the mandrel.

Form the clay around the wire, rotating the mandrel occasionally to keep the clay from sticking. Keep the clay the same depth throughout the entire bead to prevent weak spots. Shape the clay as desired, creating a square or cylindrical bead. Emboss or carve designs, if desired, being careful to not carve through to the wire frame.

Remove the mandrel from the bead. Fire the clay according to the manufacturer’s directions. Polymer clay fires below 300 degrees Fahrenheit, making it possible to fire beads in a kitchen oven. Support beads on florist wire suspended across a glass or metal baking dish to keep the beads from developing a flat spot during firing.

References

Promoted By Zergnet

Comments

You May Also Like

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!