Brick is one of the most charming and traditionally beautiful choices for home décor. Because it has been used for so many years as a top choice for home builders, it is not likely to go out of style anytime soon. Its only downside is that it can begin to look worn out and faded over time. One of the main problems with brick is that any sealant applied to it tends to yellow with exposure to sun and other elements. However, you can make your brick look brand new with just a few steps.
Things You'll Need
- Dish washing soap
- Paver stripper
Video of the Day
Fill a bucket with 1 tablespoon of dish washing soap and add water. Dip a large sponge in the bucket and scrub the brick until clean. Use a toothbrush to gently scrub the mortar between the brick as well, being careful not to scrape the mortar and cause it to come loose. Rinse the brick with clean water and allow it to dry completely.
Apply a thick coat of paver stripper to the surface of the brick using a paint roller. You can purchase paver stripper from your local paving supplier. Allow the stripper to work for 10 to 20 minutes.
Wash the stripper off of the bricks with clean water. The paver stripper will have removed all shine from the bricks, as well as any yellowing caused by the sealant.
Allow the bricks to dry for one to two days to make sure that the brick is free of moisture. Wait two days after any rain storms as well.
Use a roller to apply a new, thin coat of sealant to the surface of the bricks. Allow it to dry, then apply a second coat.