How to Paint Using Gold Leaf

Save

Gold leaf is a great addition to any artwork and can be used as the art itself by applying it as the design. You can also add shading and highlighting to the leaf after its applied. There are variations of leafing including variegated, silver and copper. Many leafs come in packages of six 5 1/2-by-5 1/2-in. sheets. Great for all indoor projects, this material adds beauty to artwork.

Things You'll Need

  • Gold Leaf
  • Metal leaf sealer (brush-on or spray)
  • Metal leaf adhesive sizing
  • Wax paper
  • Acrylic paint brush
  • Scissors

Clean the surface free of dirt, dust or wax to prepare it for the adhesive sizing. Shake the adhesive sizing well to completely mix the ingredients. Using the acrylic brush, apply the sizing to the surface by painting it onto the design as though it was paint. Let the sizing set for 30 to 60 minutes until it becomes tacky.

Cut the wax paper a little larger than the sheet of leafing. Place the wax paper over the leafing and smooth it gently onto the leafing with your hand. The leafing will stick to the wax paper to make it easier to apply it to the tacky adhesive.

Pick the wax paper up with the leafing attached and lay the leafing side down onto the adhesive design. While the wax paper is still covering the leafing, use a clean dry brush to gently rub the leafing in place.

Lift the wax paper off the leafing and gently brush away any excess leafing. Gather the excess leafing onto the wax paper and store it for future use. If there are spots where the leafing didn't adhere, simply reapply the leafing and smooth it in place.

Seal the gold leafing with brush on sealer or spray sealer. Brush on sealer will deepen the leaf color. Spray on sealer maintains the original leafing color.

Tips & Warnings

  • Try metal flakes for a different look. Gently crumple the gold leafing sheet and apply it directly to the adhesive surface for an aged look.
  • Do not use water-based varnishes with metal leafing. Always test product before using. Gold leaf is not recommended for use by children.
Promoted By Zergnet

You May Also Like

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!