How to Change the Self Propelled Belt on a Toro

Sometimes you need to replace the belt on a self-propelled mower.
Sometimes you need to replace the belt on a self-propelled mower. (Image: Thinkstock/Comstock/Getty Images)

Mowing the lawn is a chore that some people enjoy and others detest. Whether or not you are looking forward to the work, there are few things more frustrating than starting your self-propelled lawn mower, only to find that it just doesn't move. Fortunately, if you own a mower made by Toro -- a popular brand that dates back to 1914 -- replacing the drive belt is a reasonably simple task.

Video of the Day

Turn the mower on its side to access the belt cover, which is underneath the mower.

Remove the belt cover screws on the top side of the mower, then remove the cover.

Move the belt guide away from the driver assembly by removing one of the screws that hold it in place and loosening the other.

Remove the damaged or worn drive belt by first loosening it from the pulley, then pulling it from the bracket.

Run the replacement belt through the bracket, around the pulley.

Push the belt guide back into place, replace the screw you removed and tighten both screws.

Replace the belt cover, and secure it with the screws on the top side of the mower. Stand the mower upright again.

Tips & Warnings

  • Disconnect the spark plug wire before beginning work, to ensure the mower does not start accidentally.


Promoted By Zergnet

You May Also Like

Is DIY in your DNA? Become part of our maker community.