How to Make a Piggin String

Save
Use a leather belt to make a piggin' string.
Use a leather belt to make a piggin' string. (Image: Thinkstock/Comstock/Getty Images)

Cowboys typically carry their gear on their person on attached to their horse’s saddles. One particularly important apparatus is the pigging (or piggin') string, commonly called a tie-down rope or hogging rope. As you use the string to secure the back legs and one front leg on an animal, make a pigging string with sturdy material, like rawhide or tanned leather, in just the right length.

Things You'll Need

  • Cardboard, 72 inches long, 12 inches wide, 1/2-inch to 2 inches thick.
  • 60-inch long, 1 1/2-inch-wide men’s tanned leather belt
  • Ruler
  • Utility knife

Place the leather belt flat on the cardboard.

Cut off the end of the belt with the buckle.

Mark four 3/8-inch sections along the length of the belt. Draw lines down the length to make it easier to cut.

Hold one end of the belt down and cut the strips with the utility knife. Use enough pressure to cut through the leather without going through the thickness of the cardboard.

Tips & Warnings

  • Substitute the tanned leather belt with tanned or rawhide leather you can find at some craft stores or from leather shops. Cut pieces of thin rope if you don’t have a leather belt at your disposal.
  • Use caution when you use the utility knife.

References

Promoted By Zergnet

Comments

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!