How to Make a Donkey Out of Cardboard

Save
Make a realistic-looking donkey cutout from cardboard.
Make a realistic-looking donkey cutout from cardboard. (Image: Hemera Technologies/PhotoObjects.net/Getty Images)

Making a donkey out of cardboard will not be difficult with only one key material (and a few more for decoration). A cardboard donkey could be used for the popular party game Pin the Tail on the Donkey, for a nativity scene or as a decorative object for any occasion. Give your donkey color and character by painting it and drawing on facial features, and add a tail.

Things You'll Need

  • Sheet of cardboard (size depends on how big you want donkey to be)
  • Scissors or knife and cutting mat
  • Large sheets of paper
  • Paint
  • Pencil
  • Glue
  • Black string
  • Sheets of newspaper

Find an image of a donkey to help you get the correct shape for the outline. Look online and expand on a photocopier if required.

Cut out the donkey shape using scissors. Don't cut around the tail (you can add this later). Place the cutout paper donkey shape onto your sheet of cardboard and draw around it with a pencil.

Cut around the donkey shape on the cardboard using a craft knife on a cutting mat (or using good sharp scissors if you do not have a craft knife). Lay your donkey cardboard shape on a sheet of newspaper.

Paint the front of your donkey and allow it to dry before painting over the base color with features such as the eyes, nose, inside of the ears and hooves. Make a cartoon-like donkey by exaggerating the size of the facial features.

Cut several pieces of black string all to the same length to form the donkey's tail. The length should reach from the donkey's bottom nearly to the feet. Turn the donkey over and glue the black string to the back of the cardboard where the tail should sit. Turn your donkey back around and trim any excess on the tail.

Tips & Warnings

  • To make the donkey stand up, cut a piece of cardboard approximately three inches thick and two inches taller than your donkey. Fold the cardboard down two inches at the top and stick this flap to the back of your donkey using glue. Adjust to prop the donkey up depending on the desired angle.
  • Always cut away from your body when using a knife and cutting mat.

References

Promoted By Zergnet

Comments

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!