What constitutes the best way to turn an outdoor lamp on and off will depend on the type of outdoor lamp post light fixture you have and your perspective when it comes to convenience and safety. There are several factors to consider, therefore, when determining which approach is the best way for your circumstances.
What Type of Lighting Do You Need?
If you installed an outdoor lamp post fixture on your property for the purpose of merely "dressing" the front of your home's exterior at night, making it look cozy and "lived in," you will probably wish to manually turn the lamp on and off at a switch located near the front door. If this same kind of post light is located in your backyard, you should put this light on a switch near your back door entrance.
If, however, your front- or backyard post lamp needs to provide security for your property after dark, or if the lamp is supposed to light a potentially hazardous walkway, an automatic system that doesn't require your direct interaction may be a wiser and more practical choice.
Automatic Systems: Light Detection
A lamp post based on a light detection sensor will begin to turn on (in a warm-up stage) at dusk and become fully illuminated at dark. The lamp will continue to burn until dawn, at which time the lamp will begin to step down until it finally turns off completely in daylight conditions. You can purchase lamp post fixtures that operate on this technology, or purchase socket adapters that will install in any existing fixture with a screw-in bulb base. These socket adapters work with standard incandescent lamps but they may not work with newer CFL bulbs.
The chief drawback to a light-detector lamp post like this is the energy cost of an incandescent lamp that burns for nearly eight hours a day, 365 days of the year. A good option is to place a light-detection socket adapter on a standard light post that also operates on a manual switch inside the house. When the indoor switch is in the "on" position the light will turn on at dusk and stay on throughout the night, but you can still opt to turn off the lamp post from the manual switch.
Automatic Systems: Motion Detection
A motion-detection type lamp post will only turn on when the sensor detects motion in the vicinity of the lamp post. You can set the range of the sensor so it turns on when something moves in front of the sensor, up to 20 feet away, or you can narrow the sensor to only turn on the light when something moves within a few feet of the sensor. You can adjust the length of time the lamp stays lit before it turns itself out.
Motion detection socket adapters are available but these will only work in certain designs of post lamps where the lamp enclosure won't block the "view" of the motion-detector sensor located at the base of the bulb. Many motion detector socket adapters are also bulky and may raise the light bulb so high from the socket base that the lamp post cap can't be properly sealed.
The upside of a motion detector lamp is energy savings over an always-on light. But the chief drawback to motion detectors is that, when configured poorly, they can be triggered by a passing car, a pedestrian, or pets and rodents that break the detection beam, not just invited guests coming up the walkway. Under certain conditions a motion detector light can cycle on and off many times during the night, creating a weird visual disruption: There is something disquieting about watching a post light turn on and off, on and off, on and off, repeatedly during an evening. If your lamp post can be turned off by a manual switch from inside the house, you may find you're keeping such a "winking" light turned off more than you're allowing it to stay on.
- "The Landscape Lighting Book"; Janey Moyer; 2005
- "How to Design and Install Outdoor Lighting"; William Wilson; 1984
- "Indoor & Outdoor Lighting Solutions"; Ortho Books; 2003
- Photo Credit Lamp post image by Hedgehog from Fotolia.com
How to Replace a Photoelectric Switch
Photoelectric switches, or photo eyes for short, are convenient ways to add outdoor security to your home. These little "eyes" automatically sense...
How to Replace an Outdoor Lamp Post Fixture
If you live in a suburban community where street lights are non-existent, then odds are you have a lamp post at the...
How to Fix Outdoor Solar Lights That Stop Working
When the LED doesn't light on a solar landscape light, the batteries may need replacing, the panels may need cleaning or you...
How to Troubleshoot Outdoor Security Lights
Any equipment that is exposed to the weather will have problems at some point. This is especially true of outdoor security lights...
How to Wire Outdoor Light Posts
Outdoor light posts can brighten up the walkway and driveway. They also add value to your home. Wiring an outdoor light post...
How to Change Bulbs in Motion Sensor Lights
Motion sensor lights require occasional maintenance when the bulbs burn out. Fixing the problem is simple, because all you need to do...
How to Replace a Lamp Post Photo Cell
Decorative lamp posts can make a statement when installed in your yard as well as provide additional security lighting. Having a photo...
How to Add an Outdoor Light Sensor to a Light
Outdoor light sensors automatically cut a constant supply of electricity to existing light fixtures around dawn and restore the power at dusk--when...
How to Wire a Lamp Post With a Light Sensor
An outside lamp post is an excellent way to add increased security and safety to your home. But remembering to turn on...
How to Light an Exterior Gas Lamp
Exterior gas lamps offer a unique way to create light and ambiance on your patio or front walkway. Gas lamps use either...
How to Make Automatic Night Lights
Automatic lights that illuminate at dusk and turn off at dawn have a photocell sensor in them, called an "eye." The opening...
Types of Light Bulb Sockets
Light bulb sockets are an essential part of everyday life, and most people enjoy their benefits without giving them any thought. The...