There are a number of reasons for the live trapping of deer. Live trapping allows a hunting enthusiast to enjoy the thrill of deer hunting in a humane way. Live trapping is a common residential practice for property owners who want to thin the population of deer on their property by transporting them elsewhere. Biologists and other scientific researchers also need to trap deer live in order to let them go and observe their habits naturally. Live deer trapping can be accomplished with rudimentary hunting techniques that require minimal equipment.
Contact the municipality that granted you your hunting license and inquire about materials that can be used to hunt or trap deer. Even with a hunting license, certain materials are still considered contraband while hunting, and some licenses completely forbid the trapping of deer. Make sure you are in accordance with local hunting regulations before attempting to make your live deer trap. If your goal is to rid your property of deer overpopulation, you may be better served contacting your local animal control official.
Build a snare device out of aircraft cable fitted with a self-locking device. The goal of a deer snare is to hang the snare so that a deer’s head can easily pass through the opening. As they lunge forward, the self-locking device closes over the cable, tightening the loop around the deer’s neck. Use aircraft cable with a thickness close to 3/32-inch, which is enough to restrain the deer without causing excessive harm.
A rudimentary snare can be constructed by allowing the cable to hang from a branch so that the bottom loop rests about three or four feet off the ground. Thread the self-locking device over the aircraft cable to create a loop about 2 feet in diameter in order to accommodate the deer’s entire head. As the deer lunges forward, the snare will tighten around its neck.
Run the aircraft cable to a branch or tree thick enough to resist breaking under the force of a deer. If necessary, attach the cable to a tree trunk and run it along a branch to a support so that it can hang free of the tree. A simple support can be created by tying a small string of cable around the cable and branch to secure it.
Set up a small brush fence around your snare for camouflage. Set bushes within a few feet of the snare, keeping them far enough away so that there is no direct contact with the snare. Do not worry about digging holes for bushes unless it’s necessary to secure them upright.
Set up a large net to block a deer trail as a net trap. Use a piece of rope netting that is at least 6 feet long by 4 feet wide. Use rope that is darker in color to blend in better with its outdoor surroundings.
Set up the net so that the 6-foot length is running vertically. Secure the net by tying the top corners to branches. Do not secure the net so tightly so that it stays on the branch; you want the net to come off and cover the deer running through it. Let the net sit overnight and make sure to inspect your trap every day.
- Photo Credit deer image by Joan Stanton from Fotolia.com
How to Make a Barrel Antler Trap
Every year after the rut, decreasing testosterone levels cause male deer to shed their antlers. This generally happens during the winter and...
How to Make Foot Traps
Foot traps, such as the Apache foot hold trap, aren't necessarily intended to trap and hold an animal until the hunter arrives....
How to Care for a Baby Deer
In general, if a fawn has been found and a doe has not, the fawn is not an orphan. Mothers will leave...
How to Make Snare Traps for Deer
Trying to catch deer without a gun can be difficult because they are so elusive and quick. Creating a snare trap to...
How to Build a Yellow Deer Fly Trap
Trapping deer flies, which are also known as yellow flies, can avoid painful bites that result in allergic reactions or similar problems....
How to Make Homemade Hunting Traps
There are essentially two types of homemade hunting traps. Box-style traps capture animals alive and have the advantage of allowing it to...