Homemade Log Skidder for an ATV

Save

Log skidders allow loggers or others working in the forest to remove logs and trees without making large ruts in the ground or the log getting stuck in the dirt during the drag. ATV log skidders work on your ATV or lawn tractor and use the principle of lever action and friction to lift the log as it is pulled along. A very simple metal piping log skidder can be made with the use of square tubing, a set of utility trailer tires and some welding equipment.

Build the Frame

  • Start by building the square frame and hitch for the skidder. The skidder will consist of a metal square frame with a hitch protruding from one side to provide an area at which it connects to the ATV or garden tractor. Weld four three-foot-long pieces of metal tubing together to form a square. Then weld two four-foot-long pieces of metal tubing extending from the two rear corners of the square and connecting at their tips to form a triangle.

Build the Skidder

  • The skidder portion of the apparatus is built as a frame extending vertically off of the main frame with a rear bar that connects to the logging chain. As the log is pulled along, the chain slides along the bar and is raised in height. Weld a pair of two-foot-tall pieces of tubing extending from each of the front two corners vertically and then weld a four-foot bar connecting the tops of these bars. Weld a bar extending from the hitch area to the center of the four-foot bar you just welded to the front.

Install the Hardware

  • Install the hitch hardware and the wheel hardware to complete the skidder. Bolt the hitch hardware onto the front of the apparatus you have built so that it can connect to your tractor or ATV. Install the hardware for each wheel on either side of the skidder, near the rear of the frame. Attach the logging chain to the bottom of the center tubing and wrap the other end of the chain around the end of the log. As the ATV pulls on the front of the skidder, the chain slides up the tubing until it catches on the rear frame. This raises the front of the log off of the ground and allows the operator to pull the log without creating a rut.

References

  • Photo Credit Jupiterimages/Brand X Pictures/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

  • The History of Logging Equipment

    The history of logging equipment dates to the pick and ax, but mechanized logging equipment did not emerge until the late 19th...

  • Homemade Logging Winch

    Transporting logs by hand can be a labor intensive and time consuming task. Putting together a homemade logging winch can provide a...

  • How to Make an ATV Log Trailer

    All-terrain vehicles (ATVs) are ideal for collecting logs. Able to traverse over rough terrain, ATVs can go where other types of vehicles...

  • Homemade Log Hauler

    Building a log hauler requires metal crafting skills and careful measurements. The difference between a log hauler and other carriers is in...

  • Homemade Equipment for Logging

    Removing overgrown brush and trees from your property is a time consuming and physically demanding job. Many times a chainsaw will cut...

  • Log Skidder Specs

    A log skidder is a heavy-duty vehicle used in logging operations for pulling away felled trees in a forest, in a process...

  • Specs for the JD 640D Skidder

    The JD 640D Skidder is a type of heavy vehicle used to haul felled trees out of logging areas. Depending on the...

  • Types of Logging Equipment

    Also known as preparing timber, logging involves the process of felling, trimming and transporting trees. Most trees that are logged are strong...

  • Timberjack Skidder Specifications

    Timberjack provided machinery for the manufacturing forests. It provided many different types of equipment for forests removal including skidders. In 2000, Timberjack...

Related Searches

Check It Out

How to Make a Vertical Clay Pot Garden

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!