Craftsman Rotary Tool Instructions

Save

Rotary tools are some of the most versatile tools on the market. This is because there are so many different accessories that can be used with a rotary tool. With the simple change of a rotary tool accessory, the operator can go from finish sanding wood to grinding metal to sharpening a chainsaw chain to carving a nice wood project. Craftsman rotary tools are no exception. Knowing how to operate a rotary tool is the key to its successful utilization.

The Basics

  • Rotary tool accessories spin at very high rates of speed 5,000 to 35,000 revolutions per minute (RPM)]. Because of the sheer speed of the accessory, rotary tools handle unlike any other tool in the garage. You have to “get the feel” for how a rotary tool handles.

    There are two ways to handle a rotary tool: golf club style and pen style. While using the golf club style, you hold the rotary tool so your palm faces up against the tool and your thumb points towards the business end of the tool. This is the most common hold style and is used for anything for grind in to cutting. The pen hold style involves holding the rotary tool like a writing utensil. This hold style is used for fine, precision work, like carving or detail sanding. An important part of each hold style is that the vents have to remain open so the motor can breathe and stay cool, so do not cover the air vents while using the rotary tool. Also, allow the Craftsman rotary tool to complete the work at its own pace. Do not force the tool. Forcing the tool may damage the tool beyond repair.

Recommended Operating Speeds

  • The operating speed at which a given accessory is supposed to spin depends on three variables: the material being worked on, the task that needs to be accomplished and the type of accessory used in the rotary tool. Slow operating speeds (up to 15,000 RPM) is good for polishing and brushing while cutting carving, routing, shaping and drilling are done using high speeds (over 15,000 RPM).

    Because there are so many variables in recommending a specific speed setting for a given material and a given accessory type, Craftsman has created a table that includes the speed settings they recommend for a given accessory type and material. For example, using a high speed cutter on hardwoods, the speed setting should be set to 6; for soft woods, the speed setting should be set to 10. Craftsman has broken their speed setting recommendations down into fifteen different tables—one for each type of accessory.

    Before beginning a project, find the recommended speed setting for the accessory you will use to complete the project. Doing so will increase your personal safety and will extend the usable life of the accessory you are using.

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

  • Rotary Tool Projects

    A steady hand is especially critical when using rotary tools. The projects you can create are limited only by your imagination. With...

  • How to Install an Air Compressor

    Air compressors power some of the most useful tools known to man. And it is wise to spread the capability of using...

  • How to Use a Rotary Tool Kit

    There isn't anything a rotary tool kit can't help you do. Okay, that's kind of an exaggeration, but when it comes to...

  • How to Use a Polishing Compound

    Polishing compound is typically sold in bar form and ranges from fine to coarse, much like sandpaper. Polishing compound is used to...

  • Dremel Tool Instructions

    When using a Dremel tool, be sure to move in an opposite direction to the rotation to have better control over the...

  • Instructions for Using a Rotary Tool

    Rotary tools can be used for many tasks, from cutting holes in wood or plaster to delicate grinding and sanding jobs. Pet...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!