A house exterior braves all weather conditions, and, over the years, can show wear and tear and begin to fade and turn dull. Restaining the outside of your home can provide a new vibrant look and feel, while protecting the surface from various weather conditions. Restaining the outside of your home can be hard and confusing work. By following these simple steps you can begin the transformation of brightening and refreshing the outside of your home.
Pressure Washing Stained Siding
Before restaining your home it has to be cleaned and prepared for the new coat of stain. Pressure washing is an excellent way to get the job done. When pressure washing the outside of your home, you will notice that your old stain will come off of the siding. New wood will be underneath, which gives you a good basis of applying the new stain once dry. If the pressure washer does not remove all of the old stain, scrape the old stain off until new wood is revealed. This can be the most difficult and laborious task of restaining your home.
Stain on Dry Surface Only
It is important to make sure you apply the new stain on dry surfaces only. Typically, waiting 48 hours is a good rule of thumb to allow ample drying time. This can also depend on the weather, so make sure that there is not a lot of moisture or rain before staining your home.
Applying the New Stain
A good rule of thumb is that one gallon of stainer will cover approximately 100 to 200 square feet of wood. This, of course, does depend on the type of wood and density. Before applying the new stain, check the weather to make sure it will not rain within the next 24 hours. By stirring the can of stain before using, it will allow all of the pigments to be mixed together, making the wood absorb the stain more readily. When applying the stain, make sure it is evenly distributed on the wood, and that all areas of the wood are covered. If the wood is really absorbent, you may want to add another coat. To make this determination, check the label of your staining product and follow the directions.
Make sure after staining is completed that you dispose of all waste as necessary. Disposing of your rolls, brushes and other equipment in a sealed container full of water is the safest way of discarding. Finally, sit back and enjoy your ‘new’ home. All of your hard work paid off.
- Photo Credit Jupiterimages/Brand X Pictures/Getty Images
How to Restain a Wood Door
Wood is a fantastic surface to work with. It can be worked into a high glossy shine or it can have a...
How to Restain Wood Trim
Many older homes boast of beautiful wood trim. However, in many cases this trim is worn or discolored. Restaining wood trim around...
How to Stain the Exterior of a House
Staining siding is an option when you want to maintain the natural look of the wood. Cedar and pine, common choices for...
How to Restain Stained Cabinets
If your cabinets are already stained but you want a new look, don't buy new cabinets; instead, apply new stain. Staining previously...
How to Re-Stain Wood
Wood is stained to change its color while retaining the beauty of the grain. Re-staining becomes necessary in time, and can vastly...
How to Re-Stain a Log Home
Log cabins are made of a natural material that requires the protection of a stain to keep it from becoming damaged by...