A flickering fluorescent is a fascination to fathom. Alliteration aside, you must troubleshoot the system to fix this visual annoyance or change to incandescent lighting. A combination of fluorescent and incandescent lighting will fill in or smooth out the flickering. Fluorescent lamps have more electrical components than the incandescent lamps and more can go wrong. Sometimes fluorescent lamps work in pairs or other combinations. These combinations compound your troubleshooting challenge. Let's start with the basics and the most common causes of flickering.
Quick Troubleshooting and Repair of New Fluorescent Bulb Flicker
Try changing the bulb. Even if new, it may be a factory defect. Sometimes an imperfect bulb contact is make on installation. Move bulb back and forth to seat it better in its socket. Flickering bulbs can cause the ballast to heat up and fail prematurely. Discard or return defective bulbs to the store. Black spots at the ends of the bulbs is a sign the bulb is failing. Try a flickering bulb in another fixture. If it stops flickering, the previous fixture may have a bad starter or ballast.
Starters were used on older fixtures, but the newer fixtures do not use them. Starters look like small silver cans about the diameter of a quarter. They twist out by pushing counterclockwise and are usually available at your local hardware store. If you cannot purchase a new starter, test the ballast first.
Ballasts are magnetic or electronic. They should last for decades. The magnetic type costs as much or more than a new fixture. First check with an electrical parts store to find cost and availability. Make sure your starter works before taking this last step.
Detailed Troubleshooting and Repair of Fluorescent Bulb Flickering
If the above procedures have not yielded a fixed flicker on the new bulb, consult Section 10: Fluorescent Lighting Troubleshooting (see Resources) for a detailed troubleshooting chart that provides the most probable cause(s) of common problems, along with recommended corrective actions. The table is divided into four categories of fluorescent lighting.
- Photo Credit Hemera Technologies/AbleStock.com/Getty Images
How to Stop a Fluorescent Tube Flicker
A fluorescent lamp is a glass tube coated with phosphor powder, and filled with an inert gas and a small amount of...
How to Replace a Fluorescent Tube
A fluorescent tube is a long, thin type of light that is attached to fittings on walls and ceilings. The tube works...
What Causes the Kitchen Lights to Flicker?
Flickering lights in your kitchen make preparing food and performing related tasks harder, making finding the source of the problem with the...
How to Repair a Fluorescent Light that Flickers
The fluorescent light in your home shouldn't flicker randomly. Repair a fluorescent light that flickers with help from the founder and owner...