Reinforcing bars (rebars) are an important component of concrete slabs, because they reinforce the cement and increase its load-bearing capacity. The rebar needs to be correctly spaced, however. Rebar that’s too far apart lacks the tensile strength to reinforce the concrete sufficiently, but when it’s too close, the cement in the slab won’t mechanically bond to develop its own tensile strength.
Concrete Slab Rebar Reinforcement
There’s no generally-accepted rule of thumb as to how to space rebar in a concrete slab. There are many variables that influence the decision of how much space to leave, including the maximum load the slab is likely to have to support, the bearing capacity of the soil, the diameter of the reinforcing rebar, the likelihood of frost heaving the slab, and whether or not the slab is on a level grade. The steeper the grade, the more heavy loads will stress the slab, and the more reinforcement will be required. The same variables influence the type of concrete to be poured for the slab and how thick to pour it.
However, many engineers suggest a minimum distance of one slab thickness between rebars and a maximum of three slab thicknesses. For slabs with relatively small maximum load-bearing capacities, it may not be necessary to use rebar at all. For such slabs, a welded wire mesh with six-inch holes will suffice to reinforce the slab. Another recent development in pouring concrete structures such as slabs is to add polypropylene fibers to the concrete, which then form a three-dimensional mesh to reinforce the slab. The chemical-mechanical bond the fibers form with the concrete can be superior, depending on what the structure is used for, to rebar reinforcement.
- Photo Credit Jupiterimages/Photos.com/Getty Images
How to Block Support for Rebar in Concrete Slabs
Concrete is an extremely useful product, whether around the house, on the roadway or in industry. The mechanical properties of this material...
How to Determine Rebar Size and Spacing in a Concrete Pad
When a vehicle drives over a concrete slab, the concrete holds up very well against the weight of the vehicle compressing it....
The Best Way to Lay Rebar in Slab
A concrete slab has to support the weight of the structure above it plus anything that may be placed on top of...
How to Join Two Concrete Slabs
Many large slabs are split into several separate pours on different days. Sometimes, if the next section is scheduled in a different...
How to Place Reinforcing Bars
Almost all concrete structures and slabs require reinforcing bars to be placed within them to help hold the structure together. Reinforcing bars,...
How to Repair a Concrete Slab
Homeowners often overlook damage to concrete slabs, but the long-term impact of a damaged slab can be considerable: Insects and vermin can...
How to Calculate Rebar Needed in a Concrete Foundation
Calculating rebar for a foundation project is as important as calculating concrete for the footings. If you guess at the amounts, you...
How to Install Rebar in a Concrete Slab
Installing rebar in a slab of concrete will increase the strength of the concrete. Rebar are solid metal rod s that are...
How to Reinforce Concrete Slabs
When an individual is planning to pour a concrete slab, it is important that the slab is reinforced correctly to ensure the...
Rebar is used to strengthen concrete slabs and structures. The rebar allows the concrete to bend and flex without cracking and breaking....
How to Space Rebar
In order to effectively prevent cracking of concrete, and to ensure its structure is suitably strong, rebar must be placed correctly within...
How to Estimate Rebar
Rebar is unfinished steel reinforcing rod used to strengthen concrete. It comes in common lengths ranging from one-foot up to 20-feet and...
Rebar Requirements in Concrete Wall Construction
Concrete strength is enhanced with the addition of steel, combining to form reinforced concrete. Rebar is sized and placed according to the...