Kitchen islands not only expand workspace areas, but can also add a custom sense of style. Adding convenient electrical outlets or receptacles to the island space can pose a challenge. Installing outlets for extra work appliances such as mixers and food processors must be in areas that do not inhibit the countertop's workspace.
If the island uses a sink, special outlets may have to be employed to match local electrical regulations. Consult local electrical rules for the use of ground fault circuit interrupters (GFCI) for wet locations. The GFCI outlet will protect the user of any electrical appliance if that appliance becomes immersed during operation. Many times these outlets can be installed as stand-alone devices with no additional wiring required.
Overhead Cabinets or Vent Hoods
Kitchen islands that use overhead cabinets or even exhaust hood units can use these enclosures to conceal overhead electrical outlets. Most home appliances come equipped with electrical cords 3 feet or longer. The outlets can be concealed behind the upper cabinet's lower trim work and can only be seen by standing at the kitchen island. Concealed fluorescent lighting can also be installed under the cabinet or the exhaust vent hood to provide direct workspace lighting.
Under the Countertop
Kitchen islands can utilize the underside of the extended countertop as a place to install extra power outlets. Appliances with the length of any plug-in cord can be placed on the countertop. The outlets can be evenly spaced around the perimeter of the island and concealed by the overhanging countertop. In some cases, the outlets can also be placed in the base of the island itself. The sides of the island that do not hold the drawers or any opening cabinets can be installed with double outlets. Often there is enough space to install the receptacles between drawers and open shelving. While these outlets may not be completely concealed from sight, the power it supplies will be convenient.
Installed at either end and on top of the kitchen island can be pedestal-type receptacles. Typically the pedestal is constructed from the same material as the countertop itself. The height is approximately 3 inches to 5 inches. The overall height will depend on a horizontal or vertical installation of the receptacle outlets. This allows just enough room for the electrical device and the box enclosure. Generally two separate receptacles, or double outlets, are placed inside the pedestal enclosure. These small structures can be evenly spaced at either end of the kitchen island. Although perhaps not an ideal installation, for a busy island that employs a lot of appliances, the pedestal outlets will provide plenty of electrical power.
How to Run Electrical Wiring to a Kitchen Island
One of the trickiest parts of installing a kitchen island is running electrical wiring to the island, and there’s only one way...
How to Install Electric Outlets on a Kitchen Island
If you plan on installing an island in your kitchen, you can improve your design by adding an electrical outlet. This will...
Standard Height for Kitchen Electrical Outlets
There are electrical codes for wiring outlets in kitchens. Older kitchens will not have this layout but during updates or remodeling, the...
Height & Location of Electric Outlets on a Kitchen Counter
It can be very frustrating when using a small kitchen appliance and not having an outlet where you need it. Older homes...
The Height of Kitchen Receptacles Above the Countertop
The National Electrical Code restricts the placement and types of kitchen receptacles so small appliances can be used safely. The NEC also...
Electrical Outlets in Kitchen Cabinets
Your kitchen is a power fiend. Just think of all the electrical appliances you use in the kitchen and the fact that...
Kitchen Outlet Requirements
It may seem like kitchen electrical outlets are always in short supply. Considering most electrical appliances have short cords, it makes it...
DIY: Kitchen Island Ideas
Making maximum use of open space in a kitchen is the main purpose of a kitchen island. Not all homes or apartments...
Height to Install Electrical Outlets in Rough Framing
The time to install boxes for electrical fixtures in your new building is after you've completed the framing and before you cover...