Many people opt to make their own mattresses to address a number of concerns (see Reference 1). Allergies to the materials in the store-bought mattresses, chemicals used for flame retardants that can cause health issues in regular mattresses, or a desire to create a mattress specifically for your sleep needs are just a few of those reasons (see Reference 1). Accomplishing this project requires only a few materials, as well as a little time to customize a mattress you can relax on and enjoy.
The cushion, or inner portion of the mattress, can be made from foam, cotton or down, depending on your preferences. The least expensive cushion is foam, and it is readily available at discount and department stores. However, you can also purchase foam mattress cores online or in specialty stores for a substantially higher price (see Reference 2).
Measure the size of your bed so you know how much foam to purchase. Most foam for beds in stores comes in pre-cut rolls you can trim to fit your bed. Three to four layers of foam are normally used when making a DYI mattress (see Reference 1).
It is common to place a mattress topper over the layers of foam to provide a smooth surface without seams on the mattress (see Reference 1). Mattress toppers are also available at discount and department stores.
Determine if you need a hard base for your mattress. Some bed frames have only a few slats that cross the frame and require a sturdy base on the mattress. This can be a concern if you are not using a box spring under the mattress. If this is the case, purchase a latex pad for the bottom of the mattress to add support and prevent the mattress from falling through the slats on the frame (see Reference 1). When using a latex pad, slide the foam and topper onto the pad, once you have cut the pad for the dimensions of your bed.
Determine if you want a plastic shell for your mattress, or one made of material.
For a plastic-type shell, purchase a zippered mattress cover at your local discount of department store. These come in all bed sizes and are usually used to protect the mattress. All that is required after you make your mattress cover purchase is to slide the cushion portion of your mattress into the zippered cover and zip the cover shut and your mattress is complete.
For a material, futon-type outer shell, purchase two flat sheets to fit your bed size. Use a sewing machine to sew three sides of the sheets together and then sew Velcro along the fourth side of the sheets to make the mattress shell close (see Reference 3). Then slide the cushion portion of your mattress into the shell cover and press the Velcro together.
Mattress Pad Vs. Mattress Topper
Both mattress pads and mattress toppers protect the bed. Pads are typically thin, quilted material; a topper is thick enough to change...
How to Make a Natural Mattress
Making one’s own mattress has been the norm for thousands of years. A homemade, natural mattress is a good alternative to a...
DIY: Platform Beds
A platform bed is certainly one of the easiest bed frames to build on your own, and is arguably one of the...
DIY: 2X4 Futon
Futons, typically used as couches and convertible beds, are versatile and comfortable furniture with a simple design. A futon bed for a...
DIY Twin Bed Plans
Twin-size bed mattresses measure 39 x 75 inches (99 x 190 cm). Not only are they compact, but you can use them...