Homemade Security Shutters

Save

Closed shutters on windows offer an extra line of security against anyone or anything trying to get through the window. Certain shutters are stronger and better than others, and many them you can make and install yourself at a minimal cost with the right tools and hardware.

Measure Your Windows

  • When making your own homemade security shutters, first measure your window for the dimensions of your shutters. For the height measure from a half inch from the bottom to a half inch from the top of the window, as you will want the shutters to fill the entire space of the window frame, but not drag against it. For the width, measure the entire window frame crossways from one side to the other and then divide that in half, as each shutter in a set will only cover half the window.

Buy the Right Wood

  • Pick out what type of wood you want to use to make your shutters. Standard shutters are made out plywood, but if you want stronger security shutters, redwood or pine might be a better option. These pieces of wood will be more expensive and slightly more difficult to cut and construct but will also last longer. Also keep in mind how heavy the shutters will be once they are constructed out of this wood. Your hinges will have to be able to hold them off the window sill and prevent them from sagging as they swing open.

Buy the Right Hinges

  • Buy heavy-duty hinges that can each hold an ample amount of weight, even more than what your shutters themselves weigh. Also measure your window frame, to ensure the shutters can be screwed into the window frame itself. While you can install the hinges on the outside of the house, someone trying to break in could unscrew the hinges and remove the shutters to climb in the window. So if you do decide to install the hinges on the outside of the house---or must because your sill is too narrow---make sure you strip the screws once they are installed, so it is difficult to remove the hinges without the proper equipment. You want to buy four hinges per shutter set.

Latches

  • You can add many different types of locks and latches to the inside of your window shutters once they are installed to lock them into place. A barrel bolt lock is one of the cheapest and most efficient locks; these barrel bolts are simple sliding bolts often used on the doors of bathrooms and other areas in some houses. Simply screw the barrel bolt into one shutter and the metal plate it fits into to the other side. These should be installed while the shutters are closed so that the two parts are directly aligned with each other and they can lock efficiently.

References

Promoted By Zergnet

Comments

You May Also Like

  • Wood Vs. Vinyl California Shutters

    California shutters, also called plantation shutters, have long been a staple for homeowners wishing to control the light streaming into their homes....

  • How to Build Decorative Exterior Shutters

    Building your own decorative shutters can be a fun and artistic project. They can also dress up your windows outside and make...

  • How to Prevent Glass Window Breakage

    One of the most stressful parts of home ownership is worrying about the potential damage from intruders, accidents and natural disasters such...

  • Homemade Interior Shutters

    Shutters have been used to cover windows for hundreds of years. They were first used to control incoming light and drafts. In...

  • Homemade Wood Shutters

    You can design and install custom wooden shutters for your home using simple carpentry skills and tools. Shutters should accent and complement...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!