Most types of wood require some kind of sealant to protect them from moisture and the elements. While this is particularly true for outdoor wooden furniture or buildings, indoor wooden surfaces and objects need protection, too. Depending on the environment, personal preference or necessity, there are several ways to seal a piece of wood.
If your project was a garden bench made of pressure-treated lumber, sealing its surface with oil is an easy choice. Many wood workers blend equal parts of mineral oil and linseed oil for an easy-to-apply wood sealant. Pour some on a lint-free old rag such as a scrap of denim or a worn terrycloth towel, and spread it evenly on every surface. Where possible, wipe in the direction of the wood grain. On the ends of boards use a bit extra, allowing the oil to sink into the grain ends. Wipe off any excess and let the wood dry and finish absorbing the oil mixture. If the wood dries out, recoat it. Oil lets the natural beauty and grain patterns show through. For sealing indoor wooden furniture, tung oil is an excellent choice.
Unlike oils or stains, paint seals wood by forming a protective coating on its surface. Paints for wood are either water- or oil-based, and may have a flat, semi-gloss, or hard gloss finish. Paints can be custom mixed into virtually any color imaginable and can be purchased almost anywhere. If painting bare wood has a drawback, it's that most paints require a primer coat to be applied before the finish coat can be brushed, rolled or sprayed on.
If the wood to be sealed is a deck or an outbuilding, staining the surface is another popular option. Like oils, stains are designed to both penetrate the wood and seal its surface. Stains may be clear, tinted, or solid color and may be oil- or water-based. Two popular brands of stain are Cabot and Sikkens. Both brands offer superior qualities of application and durability. Cabot and Sikkens also produce a variety of stain types and colors. They can be purchased at many home improvement stores or specialty paint stores. When applying stain outdoors, make sure the wood surface is dry and free of dirt. If possible, avoid staining in direct sunlight as the stain may dry before it has time to adequately penetrate and seal the wood. The primary advantage of stain over paint as a wood sealant, is that stain does not require a primer.
When staining indoors, work in a warm, draft-free, but well-ventilated area. Make sure the wood surfaces are smooth and free of dust, sawdust or dirt.
What Is a Good Wood Fence Stain/Sealer?
Earlier preservative finishes intended for external applications had one of three organic origins. Shellac comes from a parasitic Asian insect. Paraffin comes...
How to Seal Wood
How to Seal Wood. Sealing wood protects it from the elements, slows sun and water damage, and keeps the wood from deteriorating.
How to Seal Kitchen Cabinets
Whether your kitchen cabinets are new, bare wood, old painted surfaces or finished in wood stain, they should be sealed to locked...
How to Paint Bare Wood With Rustoleum Oil-Based Paint
If you would like to paint bare wood with Rustoleum oil-based paint, you will need to consider a pair of factors before...
How to Seal Outdoor Wood Gaps
Any outdoor gap between wood siding or trim allows water to enter the exterior walls from rain and humidity. After water enters...
How to Make Cheap Cabinets Look Good
The sooner you face your cheap cabinets, the sooner you'll be able to start making them look good. Most homeowners want to...
How to Seal Raw Pine Wood
Pine can be a beautiful wood to work with. Stained with an amber stain and polished to a high luster, pine can...
What to Use to Seal Painted Wood in the Outdoors
Exterior paints are formulated with chemicals that make them waterproof and resilient to extreme weather conditions. You do not need to seal...
The Best Way to Seal Bare Pine Doors
All bare wood must be sealed in order for that species of wood to hold its appearance. Pine doors are no exception...
The Best Way to Seal a Wood Tabletop
Tabletop sealing is a process involving sanding, spraying, brushing or wiping a specific product on the table to protect it. You don't...