The 2014 Jeep Wrangler comes equipped with the Uconnect 130 audio system. The Uconnect 430 is an available option on the Sport and the Uconnect 430N and 730N are available options on the Sahara and Rubicon trim levels.
Set the Clock
Press the "Time" button on your Uconnect unit and hold it until the hours digits flash. Turn the tuning knob clockwise or counterclockwise to increase or decrease the hour value. Once the hour is correct, press and release the tuning knob and the minutes digits will flash. Turn the tuning knob to set the minutes, and then press and release the tuning knob to save the changes. To exit the clock-setting mode, press any key on the Uconnect unit or wait 5 seconds for the settings mode to time out.
How to Reset the Change Oil Alert on a Jeep JK
The third-generation Jeep Wrangler model, known as "JK" by the digits in its Vehicle Identification Number, made its debut for the 2007...
How to Set the Clock in a 2002 Jeep
Your 2002 Jeep Wrangler has a clock built into the factory stereo system. Resetting the time on the clock is required if...
How to Set Clocks in a Chrysler
The clock in your Chrysler will need to be re-set at least twice a year due to seasonal time changes. It will...
How to Set the Clock on a 2007 Jeep Liberty
Jeep is the division of the Chrysler Group that focuses on off-road, sports utility vehicles. The Jeep Liberty is a compact SUV...
How to Set a Clock on a 2005 Jeep
Jeep has been producing rugged, off-road sports utility vehicles since 1941, when the automaker was founded as a division of the Chrysler...
How to Change the Clock in a Jeep
Having the digital clock in your Jeep vehicle display the incorrect time can be frustrating if you don't know how to change...
How to Set Up a Cell Phone With a Jeep Wrangler JK
Setting up your smartphone with the Uconnect system in your 2015 Jeep Wrangler isn't as complicated as it might look. You can...
How to Set the Timing on a 1997 Jeep Wrangler
The fuel injection and the ignition timing in the 4.0-liter engine in a 1997 Jeep Wrangler is controlled by an onboard computer....
How do I Change a Water Pump in a 97 Jeep Wrangler?
The water pump on the 1997 Jeep Wrangler is located in the front of the engine. The pump pulls water from the...
Directions to Install a Distributor in a Jeep Wrangler
The distributor provides high-voltage sparks where they need to be so the mixture of air and fuel can burn -- a burn...
How to Set the Timing on a Jeep Wrangler
AMC introduced the redesigned Jeep Wrangler in 1987 and built the model for one year before the company was bought by Chrysler....