The Viper has existed as one of the world's premiere and highest-selling sports cars since it was first manufactured in 1992. The automobile is known for its flashy appearance and fast driving, and many owners wish to equip this expensive vehicle with aftermarket alarms. Programming your Viper 476V alarm can be a simple process done from home without a professional or automotive expert.
To begin programming your Viper 476V security alarm remote, you should first enter your car with all of the doors and windows on your Viper locked. Make sure the trunk is closed, and sit in the driver's seat with your remote or remotes to be programmed in hand. You should then open your driver's side door and place your Viper key into the ignition and turn the key to the "On" position, which is two clicks to the right of the off position, and one click short of starting the ignition.
To begin the programming sequence, you should press and release the valet switch on your 476C remote nine times in quick succession. After the ninth time pressing the valet switch, press and hold the button and allow the alarm to beep in your car nine times. Continue holding the button and you should then press and release the lock button on every remote that you are programming, up to three remotes. Keep the valet switch held in your one hand. The buttons on the multiple remotes do not have to be pressed simultaneously, but they should be done in quick order.
Completing the Process
Once you press the lock button on each remote, you can release the valet switch on the first remote and turn the key in your ignition two clicks back to the left, to the "Off" position. Wait for the alarm to beep an additional nine times and remove your key from the ignition. You can then press any button on your remote to test to see if the programming sequence was successful on your Viper 476V remote.
How to Program a Viper Remote Control
Viper, a popular brand of car alarm, has become an essential product for many car owners. These kind of alarms are simple...
Viper Car Alarm Instructions
Viper brand car alarms are installed with multiple alarm options to fit your time availability and security needs. The Viper alarms possess...
Directions to Program a Viper 474 V Remote
The Viper 474V remote is among the various Viper remotes that can be programmed to control a variety of features on your...
How to Program a Remote Keyless Entry on a Viper 488V
Viper is a well-known manufacturer of car alarms, keyless entry devices and remote starters. The Viper 488V car protection system has all...
How to Program a Viper 474V Remote
Viper car alarms systems, manufactured by Directed Electronics (DEI), have grown in popularity with many vehicle owners and car manufacturers in the...
Viper Remote Instructions
Viper Car Alarms makes advanced automotive security systems that are controlled through the use of a remote device. Viper's popular security and...
How to Program the Replacement Remote 791XV
Programing a Viper 791XV replacement remote to your keyless entry system can give you peace of mind in the event something happens...
Viper Remote Start Installation Instructions
Viper makes a large variety of automotive electronics aftermarket products, including security systems and remote starter kits. To successfully install a remote...
How to Program a 479V Blue 4-Button 2-Way Remote
Viper car alarms use a four-button transmitter for functions such as locking and unlocking the car doors and remote ignition. If your...