Can You Weld Galvanized Steel?


Galvanized steel welds similar to uncoated carbon steel when properly prepped. If you attempt to weld galvanized steel without removing the galvanizing from the weld area, the weld puddle will pop, blow out and create a health hazard to the welder and any individuals in the immediate area.

Prepping the Galvanized Steel

  • Removing galvanizing from galvanized steel is best accomplished with a hard wheel, flapper wheel or grinding disc attached to a grinder. Hold the grinder at a 15-degree angle to the metal, and make long passes along the weld area with light pressure being applied to the grinder. The relatively flat angle of the grinder is to reduce the amount of carbon steel that is removed during the grinding process.

    If you use a coarse grinding wheel or grinding disc, you will need to make additional passes with a finer grit flapper wheel or grinding disc to ensure that all the galvanizing is removed.

Welding Galvanized Steel

  • With the galvanizing removed, the carbon steel will weld just like uncoated steel, and all standard forms of welding can then be used. Standard welding prepping practices should be used to complete the prep work, for example grinding knife-edge bevels on thicker metal. If a lot of yellow-green smoke is noticed during the welding process, or floating fluffy white material is seen floating in the air, there is still galvanizing in the weld area and more grinding will be needed.

    After the welding is complete and allowed to cool, put cold galvanizing over the weld to maintain the galvanized steel's rust resistance. Cold galvanizing is available as a brush-on coating and in a spray can.

Galvanize Poisoning

  • Welding galvanized steel without removing the galvanize coating will result in emission of a heavy, noxious yellow-green smoke that will envelop the welder. Continuous exposure to this smoke can result in galvanize poisoning.

    Galvanize poisoning symptoms include a severe headache and nausea. To reduce the effects of galvanize poison, move to fresh air and drink plenty of milk to settle your stomach. There are ventilation welding hoods that can reduce the amount of smoke the welder inhales.

Related Searches


  • Work Experience
Promoted By Zergnet


You May Also Like

  • Side Effects of Galvanized Steel Welding

    Welding galvanized steel is common in the metal fabricating industry. Most welders will at some point in their career perform a weld...

  • How to Weld Galvanized Steel to Carbon Steel

    Galvanized steel and carbon steel contain the same base material, steel. The corrosion-resistant zinc coating that covers galvanized steel is the only...

  • How to Grind Galvanized Steel

    The galvanized coating surrounding mild steel protects the metal from moisture, inhibiting rust. Grinding the coating from the steel prior to welding...

  • How to Weld Steel Cable

    Welding steel cable requires a certain technique and skill in order to make it bond to another piece of metal or combine...

  • How to Glue Steel With J-B Weld

    With a tensile strength of 3,960 psi, J-B Weld is a structural adhesive, meaning that it makes permanent repairs that are as...

  • How to Do Downhill Pipe Welding

    The ability to weld a pipe can be valuable in a variety of situations, and industries, such as working on oil pipelines,...

  • How to Weld Aluminized Steel

    Aluminized steel is used in the manufacture of automotive exhaust parts and other items due to its heat- and corrosion-resistance. Since the...

  • How to Braze Galvanized Pipe

    Brazing galvanized pipe can be easily if the correct steps are followed. Steel is often galvanized by dipping it into a zinc...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!