Owning a swimming pool is a lot of fun for the entire family, but it requires maintenance in order to keep it clean and healthy for everyone to swim in. A shock helps keep all of your pool chemicals balanced and your swimming pool water crystal-clear.
Pool shock should be added every week to ensure a clean and green-free pool, but this can also be determined by the weather and amount of time you spend using the swimming pool. The higher the temperature and pool use, the more often you should shock, due to bacteria, algae and ammonia forming.
Always shock your pool at dusk or nighttime, in order to allow the shock to reach breakpoint oxidation. Shocking your pool in the middle of a hot, summer day would cause the sun to burn off 1ppm of shock every hour, causing it only to reach breakpoint for an hour instead of for eight to 10 hours.
Testing Pool Water
Testing the pool chemicals is important and should be done each time before adding shocking materials.
Test your pool water to see if it needs to be shocked by smelling the area around pool. If the water has a strong scent of chlorine, it requires shocking chemicals.
Purchase a pool test kit that has the ability to read total as well as free chlorine. Whenever these two chlorine reading numbers are not the same, the pool needs to be shocked. Amount and type of shock also should be determined by the type of pool system you are using. Shockers are available as non-chlorinated for non-chlorinated pools and chlorinated for chlorinated pools.
Adding Shock to Pool
If you are an average homeowner with a pool, you will most likely shock your pool once each week after running a test kit. Mix shock chemicals and water according to package directions. Always add shock to water, not water to shock, when shocking your pool. The shocker you have purchased will likely be a quick-dissolving chemical, but you can use the pool skimmer to stir it to speed up the oxidization process.
What Type of Shock Should I Use for My Above Ground Pool?
Contaminants in an above-ground swimming pool can build up from overuse, lower the concentration of disinfecting chlorine, and turn the water dull...
How to Shock a Swimming Pool
Shocking is the process of elevating the chlorine level in a swimming pool or spa to sanitize the water or to kill...
How to Know When to Shock The Swimming Pool
The process of shocking a swimming pool refers to adding enough chemicals to kill or neutralize all organic substances. Different chemicals can...
How to Maintain a Salt Water Swimming Pool
A salt water swimming pool uses a chlorine generator to transform ordinary salt (sodium chloride) into chlorine, which sanitizes the water. Because...
How to Shock a Pool With Bromine
Shocking a pool kills bacteria, germs and other organisms that can make for an unpleasant swim. Chlorine and bromine are the two...
What Does Shock Do for a Pool?
At times, swimming pools need a little shock treatment. The basic purpose of pool shock is to restore the proper amount of...
How Much Chlorine Do You Need to Shock a Pool?
As a part of regular maintenance, you shock a pool periodically to remove organic compounds, remove chloramines and free up the available...