Do It Yourself Concrete Coating

Save

A dull concrete floor in your garage, patio or basement can make your home look drab and uncared for. But a simple, do-it-yourself resurfacing project can dramatically enhance the look and feel of your home and outdoor space. Coat your floor with a clear sealant or epoxy coat, and your concrete patio, basement or garage will gleam brand new.

About Sealant

  • By sealing your concrete floor, you're preventing moisture from seeping in, over time. In a basement or garage, a sealant is especially important as it will help prevent mold from forming in your home. Moisture will also form cracks in your floor, which a good sealant will prevent.

Sealant Types

  • There are two main types of concrete floor sealant: penetrating and film-forming. Film-forming sealants work similarly to paints, forming a protective film over the surface which repels moisture. Penetrating sealants seep into the pores of the concrete, and form a resistance to water and stains.
    In 2005, the Environmental Protection Agency (EPA) examined the two types of sealant. While its study aimed to gauge their effectiveness on wood surfaces, the results can be applied to concrete surfaces, too. The EPA concluded that penetrating sealants were more effective long-term, as they did not tend to peel and flake as film-forming sealants are apt to do.
    As for the look you're trying to create with your sealant, each type has a variety of colors and glossy finishes to choose from.

Prepare the Concrete

  • Once you've chosen your sealant, prepare your concrete for coating by cleaning it thoroughly. If you're sealing your driveway, apply a high-pressure water hose to clean the surface of all dirt and gravel. Indoors, clean your garage or basement floor thoroughly of all grease and oil stains. A clean surface is imperative for your sealant to adhere properly.
    Once your floor is ready, apply the primer. Primer and sealant are toxic, so wear protective gear, such as goggles and a respiratory mask, when coating the floor. Also, keep an electric fan running close by. To apply the primer, you'll need painting materials such as a roller and splash pan. Apply the primer to the concrete as you would apply paint. Once you have applied an even layer to the entire surface, allow the primer to dry for several hours.

Coat with Sealant

  • The second coat is the finishing layer. Apply it once the primer is completely dry, and in exactly the same manner. Inspect your floor closely for missed spots. Leave the second coat to dry overnight. In the morning, run over your floors with a quick sweep and coat of polish.

Related Searches

References

Promoted By Zergnet

Comments

You May Also Like

  • How to Paint Your Concrete Patio

    Painting your concrete patio can literally change the entire look and feel of your outdoor area. Painting the patio adds a layer...

  • How to Seal & Paint Concrete

    Painting concrete can create vibrancy and mood to existing construction. Concrete must be completely dry and clean prior to beginning this process....

  • Do It Yourself Concrete Driveway Coatings

    Concrete is a frequently used material for driveways because it is durable and relatively inexpensive. The exposure of the concrete surface to...

  • Do it Yourself: Concrete Resurfacing

    Concrete is a popular building material because of its strength and affordability. Because it is a porous material it will develop pits...

  • Do it Yourself Concrete Patios

    Concrete patios add versatility to your yard and entertainment options. They also are easy to install and make a great do-it-yourself project...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!