Mini Maglite Instructions

Save

The Mini Maglite is an adjustable light beam flashlight with an aluminum housing and an extra light bulb in the base. The Mini's light beam can be adjusted from spotlight to floodlight, and with a small adjustment can be made into a candle light. It only takes a few minutes to set up the Mini Maglite, after which it is ready for use.

Inserting Batteries and Regular Operation

  • The Mini Maglite requires twp AAA batteries for proper operation. The batteries are inserted in the base tubing. To insert the batteries, twist the tail cap until it is removed from the base. Slide the batteries into the tube with the positive ends facing the bulb of the flashlight. Once inserted, twist the tail cap back onto the body until it is secure.

    The flashlight does not switch on and off with a button. To turn the Mini on, twist the head of the flashlight. When first switched on, the Mini has a flood beam, meaning the light is spread out over a large area. Continue to twist the head to adjust the beam of light. When twisted fully, the light is a tight spotlight.

    When finished using the Mini, twist the head of the flashlight fully back until the light goes out.

Candle Mode

  • In addition to the flood and spotlight beams, the Mini can act as a candle. In candle mode, the light is not directed at a single point, but rather provides 360-degree illumination. To place the Mini in candle mode, twist the head of the flashlight until it is at full spotlight. You will notice there is resistance when you try to turn it further. Using a little extra pressure, twist the head past the resistance point to remove it from the base. Once separated, place the head of the flashlight face down on a flat surface. The head will now act as a stand for the base of the flashlight. Insert the back end of the flashlight into the head.

    To turn off the light, take the base of the flashlight out of the head and twist the head back onto the base over the light bulb. Continue to twist the head until the light is off.

Changing the Bulb

  • When the bulb dies on the Mini, remove the batteries from the base of the flashlight and leave the tail cap off. Remove the head of the flashlight to expose the bulb. Gently pull the bulb from the base of the Mini and discard. Pull the spare bulb out of the tail cap and insert it into the socket of the base. Reattach the head of the flashlight, reinsert the battery and place the tail cap back on the base.

References

Promoted By Zergnet

Comments

You May Also Like

  • Maglite Instructions

    Mini Maglite Instructions. The Mini Maglite is an adjustable light beam flashlight with an aluminum housing and an extra light bulb in...

  • Mini Maglite Troubleshooting

    Mag Instrument's Mini Maglite is a flashlight with an aluminum alloy case whose light you can focus from an intense ... If...

  • How to Remove a Spare Bulb in a Tail Cap Mini Maglite

    How to Remove a Spare Bulb in a Tail Cap Mini Maglite. ... The Mini Maglite is an adjustable light beam flashlight...

  • How to Change a Maglite Battery

    How to Change a Maglite Battery. ... Mini Maglite Instructions. The Mini Maglite requires twp AAA batteries for proper operation.

  • How to Disassemble Maglite

    Now open the tube. 3. Turn the lens counterclockwise in order to disassemble the top part of the Maglite. ... How to...

  • How to Replace a Maglite Switch

    Maglite: Switch Repair Instructions for Mini Maglites; Resources. Read this Article in UK English; Photo Credit flashlight image by Aleksandr Lobanov from...

  • How to Assemble a Mini Maglite

    The Mini Maglite is a small, lightweight flashlight featuring a high-powered LED light bulb. ... Do not turn on the flashlight until...

Related Searches

Read Article

19 Home Decor DIYs That Only Look Expensive

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!