Do it Yourself: VHS to DVD Conversion

Save

Converting a VHS tape to DVD offers many advantages. For one thing, no moving tape will jam or tear up. The image deteriorate will not deteriorate over time like a VHS tape. A DVD is also smaller and easier to store.

Materials Needed

  • Set up the VCR player next to the computer. The computer must have at least 3 gigabytes of free hard drive space and also have a DVD burner built in (or as an external drive). There must also be at least one free USB port on the computer and at least one blank recordable DVD disc.

Setup: Video Capture Device

  • Place the VCR deck near the computer and plug it in for power. Attach either the Composite or S-Video output from the VCR into the video capture device (S-Video provides for a better picture). Also attach the two audio outputs from the VCR into the video capture device. Turn on the VCR.

Setup: Computer

  • Plug the other end of the video capture device into a USB port on the computer either directly or using a USB cable that attaches to the USB port. Run the software that came with the video capture device (and which has been transferred to the computer's hard drive). Choose from some basic settings, such as between using Composite or S-Video and where to save the digital file it will make. Insert a video tape and press "Play" on the VCR. Watch to see if there is both video and audio coming from the VHS tape.

Making a Digital File from the VHS Tape

  • Rewind the tape back to the beginning. Press "Play" on the VCR. Then press "Record" on the video capture software. The conversion from VHS tape to digital file occurs in real time so wait till the tape completely finishes. Stop the recording on the computer and follow the directions to save the copy that has now been made to the hard drive. Stop the VCR and rewind the tape if desired.

Turning the Digital File into a DVD

  • Run DVD software to turn the digital file into a DVD (examples of this being Toast Titanium 10 on the Macintosh and Nero 9 on PCs). Place a recordable DVD into the computer's DVD drive and tell the software to proceed. The software will now make the digital file into the proper format and burn it onto the disc. Eject the disc when done. This DVD can now be played on any stand-alone DVD player just like it was a commercial disc bought in a store.

References

Promoted By Zergnet

Comments

Resources

You May Also Like

  • VHS to DVD Conversion Equipment

    If you are tired of having stacks of VHS tapes but still want to have copies of your favorite movies to watch,...

  • How to Transfer Movies from VHS to DVD

    How to Transfer Movies from VHS to DVD. Most of us have shelves filled with precious memories stored on VHS tapes. Transferring...

  • How to Convert VHS to DVD

    In order to convert the contents of a VHS tape, such as wedding or graduation video, to DVD, connect a VHS player...

  • Convert VHS Tapes to DVD

    Converting a VHS tape to a DVD can be done in a few different ways, which include using a combination VCR/DVD player...

Related Searches

Check It Out

Geek Vs Geek: Robot battles, hoverboard drag race, and more

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!