Catering Tips for Delivering Food


Creating the meal for a catered event takes planning and coordination. Getting the food to the venue in the same shape it left the kitchen needs to be part of the organization as well. Hot foods need to arrive that way and cold foods need to be kept at the proper temperature to be safe and edible. Gathering the right equipment and taking an extra couple of steps will ensure the meal's success.

Hot Boxes and Cooler

  • Purchasing well-insulated plastic or metal containers for transporting food is essential for catering. Some are specially designed to accommodate hotel and sheet pans by having slots built into the cavity. Think of these boxes like thermoses; they will keep your food hot while you transport it from your kitchen to the facility. Remember that these boxes are not designed to heat food, only keep them warm. Making sure your food is above the safe holding temperature of 140 degrees F when you place it in the hot boxes will help ensure a safe product when you arrive.

    Store your cold foods the same way to ensure that perishables remain at safe food handling temperature of under 41 degrees F. Commercial restaurant supply stores sell plastic insulated pads that you can place on top of your cold food pans for this purpose.

Containing Hot Foods

  • Wrapping your food well will make sure it arrives at the venue ready to serve and not wind up all over the transport vehicle. Just using a strong foil wrap won't keep soup from sloshing over the rim of the holding pot and onto the truck bed. Get a good quality plastic wrap and seal the pan or tureen before you place the foil on top. Some caterers double the job by wrapping the entire pan or pot in foil. Not only will this provide an extra layer of protection against spills, it can double as insulation if a hot box isn't available.

Wrapping Platters

  • Cater wrapping is an industry technique that keeps food sealed on the tray until it's time to serve. For cold platters that have been painstakingly laid out you will want a little extra insurance that you won't start losing canapes during the travel process. To do this, pull a long piece of plastic wrap out of the box and place the tray on top of it. Bring the wrap up and around to completely seal the tray. If there are still gaps, turn the tray and repeat the process.

    Accidents happen and trays get dropped, but if your tray is well wrapped you won't have to waste food that's been dropped on the floor. In the best case scenario you'll be able to salvage that painstakingly-laid-out party platter.


Promoted By Zergnet



You May Also Like

Related Searches

Read Article

How to Throw a Halloween Dinner Party

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!