eHow launches Android app: Get the best of eHow on the go.
There are 8 videos in this series:
Composite decking material is a plastic and wood fiber combination that is made with recycled plastic polyethylene. Discover why composite deck material stands up to weather extremely well with help from a certified home inspector in this free video on exterior remodeling.
Router jigs are used as templates to guide routers into making specific cutting designs or patterns. Discover how to use a router jig to make a release on doors for hinges with help from a certified home inspector in this free video on power tools.
Drywall can't really be bent because the material that drywall is made of, gypsum, will break when bent. Find out how to use a plywood bender-board as an alternative to bending drywall with help from a certified home inspector in this free video on interior building and remodeling.
If a PVC water pipe is damaged, the cut section needs to be removed and replaced with a new section that is glued into place. Learn about using PVC primer and PVC glue to fix PVC water pipes with help from a certified home inspector in this free video on water pipe repairs.
In order to light a wood-burning stove, kindling is needed for ignition, which can be accomplished in a couple of minutes with the use of a propane torch or newspaper. Discover how to arrange kindling for a good wood-burning stove with help from a certified home inspector in this free video on wood-burning stoves.
Toilet seats are held down by two fasteners, and these can be removed by twisting counterclockwise, which will then free up the toilet seat. Find out how to secure fasteners when replacing a toilet seat with help from a certified home inspector in this free video on toilet seats and home repair.
When installing insulation, it's important to wear protective gloves, a long-sleeved shirt, a hat and a respirator. Find out why it's important to use baby powder on exposed skin when installing insulation with help from a certified home inspector in this free video on insulation installation.
In order to replace a drill press table, the first step is to slide off the base table and the head assembly. Find out why Allen screws may need to be removed when replacing a drill press table with help from a certified home inspector in this free video on drill press tables.
Mark Blocker Mark Blocker is a semi-retired ASE-certified master mechanic with more than 20 years of automotive experience. He has been a state-certified emissions specialist for more than 15 years and Ford EEC-certified for more than 11 years. He has also taught as Electronics Instructor for 4 years and a Snap On Technical Training Contractor for 1 year.dkdk
Read More
Copyright © 1999-2009 eHow, Inc. Use of this web site constitutes acceptance of the eHow Terms of Use and Privacy Policy. en-US Portions of this page are modifications based on work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License.
