-
Step 1
Remove factory radio. Take care when removing the factory radio to do so with great care, the bezels surrounding them are held in with small easily broken plastic clips
-
Step 2
Install aftermarket radio bezel into factory radio opening. This can be found online at any car stereo site, or at your local auto parts store.
-
Step 3
Install aftermarket radio sleeve if applicable, or install radio ( with screws) directly into car stereo adapter.
-
Step 4
Install factory radio wiring harness to after market radio using electrical tape and or solder, wire nut, butt splice, etc ....Install aftermarket radio. Be sure to follow the manufactures instructions when installing the wiring as usually the color of the wiring harness matches the aftermarket radio, but it may not always be so.
-
Step 5
Slide radio into sleeve (if applicable) until it snaps into place. Reconnect car battery and turn the radio power on.
