Refilling HP Printer Cartridges

Save
Next Video:
How to Refill HP Printer Cartridges 22....5

Most HP ink cartridges contain a print head on the bottom and are refilled by peeling back the sticker and injecting ink into the pre-cut holes of the cartridge. Fill a syringe with ink and insert it into the cartridge holes with help from an employee of an ink-filling station in this free video on HP printer cartridges.

Part of the Video Series: HP Printer Cartridges
Promoted By Zergnet

Comments

Video Transcript

Hi this is Taylor and we're here talking about HP cartridges and how to refill HP ink cartridges. HP's inkjet cartridges that contain the print head on the bottom are all refilled in a likewise manner. Simply remove the top sticker which reveals precut holes done by the manufacturer. Once you have removed the sticker simply fill a syringe full of ink and insert. Be careful not to push down too hard as it can damage the filter. Once you have injected about 5 milliliters for the color and 15 to 20 for each of the black, remove the syringe, replace the sticker and you are done. Some of HP's older models are done in a likewise manner but instead of removing the sticker you need to punch out the top three. This one here I have left for demonstration, simply push it into the print cartridge. This has no bad effects for the cartridge. Inside the cartridge are sponges so punching in these little plastic BB's does not have any bad effects. Once you have uncovered it, insert a long syringe most of the way down the cartridge. Do not go any further than this as it can cause printer damage.

Featured

Related Searches

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!