Remove Motorcycle Brake Pads

Video Transcript

"Alright next we're going to go ahead and take the towels off of our calipers and we're going to go ahead and and check the brake pads on this, and on these first thing that we're going to do is, if you could see there's an Allen head on each side, now that's basically, these are the brake pads, these two holes, when the brake pad goes into the caliper, these two screws go in to lock them in place. So that's all these two holes are, and what we're going to do is grab 5mm Allen Wrench, just break it loose. Just like that, and these ones you're' going to take the screws all the way out because thats the only way you're getting that pad out. Once you get these out, the pad should fall right out. Just like that, and these are the used pads. This is a new pad, and this is an old pad. You can see how much has been worn away. These pads are, are actually not too bad at all, I've seen a lot worse, they'll be a lot flatter than that. But, in this case, we're just going to go ahead and swap them out and get some new pads with, along with the rotors."