Woofer Speaker Loading

Video Transcript

"Your mad agent scientist is back, now we are actually going to load the woofer into a box and try to implement it, here we go. Negative to negative, we are loading a DVC, we are reducing the ohm load. Positive to positive, notice the red stripes. We have an enclosure here, we have two sets of voice coils. One into one sent, remember how I said get a tight thread, that was not a tight thread, squeeze that extra tight, join the pair into the negative connection. Other side here, bare wire, we have a positive and a negative, wind it around make sure you get a tight thread. Positive going into positive, negative going into negative. Now, we will be taking our terminal connectors and connecting them into the terminal connection in the box. Dropping the woofer in the box, make sure the woofer is fitted correctly, do not want to have to much over gap, do want to have screws going through the gap. Screw one, notice I am countersinking the screws. When I have an even distribution of clamping on the woofer. Now for those of you that are not experienced, you should always have a screw guard, over your drill head. This will prevent you from lancing the woofer, the surround with the tip of screwdriver. Loaded woofer box and now next step, here in a minute, the end result."