Gluing Beads on Foam Hair Clips

Video Transcript

"OK, let's do the orange heart. I'm putting my finger on the area that I marked as an overlap area and we'll just put that glue on all around the edge and everywhere except where we marked the overlap area. Nice and thick so the beads will sit in there. It will take overnight to dry but it will hold the beads on nicely. You just spill those beads on and shake off the excess. We'll set that aside to dry and then we'll go to our next color. Now our blue heart doesn't have any overlap area so you'll need to just hold it very carefully on the end, cover that heart up. We'll pour over our blue beads. Now, with the bugle beads you do have to push them down a little bit. And anything stuck to the edge and the end will pull off. We'll let that dry. Our last color is the yellow. If you have an overlap area it's a nice way to hold it down you can just put your finger there. Trace along the line, do all around the edges, covering that foamy piece with a good layer of glue. Then we'll just pour our beads over it. Let those dry and then we can put the whole Barrett together."