Fruity Loops Studio Sytrus Generator: Mixer Matrix

Video Transcript

"Sytrus has its own built in mixer matrix you probably have seen it over the past few clips off on the side with all these hundreds of knobs seeming off on the side, I'll now explain to you how these things work. Each of these numbers represent the individual oscillators, down here is also the filters. There's three different filters and one FX. The mixer also has a pan for each of these, each of these listed here and also has the out. Right now the only thing that's happening is that oscillator one is going out, say I want wanted oscillator two to work as well. I would turn this on and now oscillator one and oscillator two will play at the same time. If I wanted to have frequency modulation between oscillator one and two I would go to two and one or two and one and move these knobs. This creates FM in between each of the, each of the frequencies. Now if, if we do, if you do one, one what that actually does is it creates feedback. That's a pretty big difference, now if you want one of the oscillators to run through the filter and go out you want to turn the outs off here. Turn the filter on from which oscillator you want and then turn the filter on the out. If you want effects on the filter you turn the effects on and if you want to pan it either way you turn the pan on. And that's how the mixture functions in the, in the Sytrus environment. It looks pretty complicated but really it's pretty intuitive once you fool around with it long enough that you really get it."