Video: Applying Surfacing Agent to Surfboard Ding

In order to sand a surfboard, you have to apply a surfacing agent to resin. Learn how to apply a surfacing agent to surfboard dings in this free surfing video about how to repair a surfboard.

Video Transcript

So here's our other board that we laminated. We're outside and we're just, we got the lam coat on it. We're just going to give it a minute just like the last board and then we're just going to go ahead and walk it over and we'll put the sandy coat on this as well. So let's do that, it's all ready to go. We got our hot coat resin and we'll just work it from the inside out. We just brush it back and forth, get all that fiberglass filled in and then like I said at the end, we'll just put a nice finishing brush stroke on it that will make it easier for us to feather that in. Then we'll set that outside and another hour and a half and we'll be sanding that and put the gloss coat on it, which is the coat right before we polish it to finish the board.

Applying Surfacing Agent to Surfboard Ding

Comments

Related Ads

Related Articles & Videos