Sport Bike Slip-On Exhaust Installation

Video Transcript

"Alright in this clip we're going to go ahead and start putting on our exhaust. Just slide it in here like this. I'm going to slide that on top. It should fit right on there. And ahead and rest it. And before we put that on we're going to go ahead and mount our exhaust. Alright so we're going to go ahead and underneath here there's a section that's going to be connected to our pipe so let's go ahead and stick our screw through there and we're just going to go all the way through okay in there and then we're going to follow through with a nut on the other side and push that through. Alright once you get it in there take your ratchet and tighten it up. Okay next we're going to be putting on a clamp. It's going to go over our exhaust. It's going to be connecting right here but first we need to take out this bolt and we need to put on a replacement bolt. So let?s go ahead and take this one off. Alright then after that go over here and flip on our new clamp. And stick on your new clamp like this. Push it all the way through. It is going to screw in. Alright and we're going to go ahead and use a wrench to keep that tight and twist to make it tighter. Alright now we're going to go ahead and do the same thing on the other side. Because it's already tight inside the plastic we're just going to tighten this bolt and hook this one down. Alright and lets go ahead to finish up. Tighten on our clamp. So we're going to put our bolt back in there and then we're going to use a lock nut washer and then screw that down nice and tight. And that's it. We'll be done. We've just got to put our plastics back on."