-
Step 1
On any computer that is connected to the Modem, type http://192.168.100.254 in the web browser window and then press Enter.
-
Step 2
Enter your User Name and Password and click OK.
-
Step 3
Select "Wireless Settings" from the top bar.
-
Step 4
Select “Basic Settings” from the menu on the left.
-
Step 5
Write down the name of your Wireless Network or ESSID and the WPA-PSK Key. Note: By default, Security is turned off. We recommend turning Security on. See "How to turn on the wireless feature on your GT724WG Wireless DSL Modem for MTS".
-
Step 6
Go to the computer that you want to connect wirelessly to the Modem. Right click on the "Wireless Icon" on the bottom righthand corner of your screen. Then select "Connect to a network".
-
Step 7
Then select the name of the network and click "Connect".
Note: The network name should match the name of the ESSID listed on the Basic Settings Page. -
Step 8
You'll be asked to enter a password. Enter the WPA-PSK Key as the password. Make sure that you enter the WPA-PSK Key EXACTLY as it is written.You'll need to pay attention to the use of capitalization etc.Then click Connect.
-
Step 9
Once you see the screen "Successfully connected to....", make sure that the boxes next to "Save this network" and "Start this connection automatically" are checked. Now click "Close".
-
Step 10
Now you'll need to select a location for where you are, i.e. Home.
Congratulations! You should be connected to the GT724WG MTS Wireless DSL Modem.
