Using Slider Functions in Virtual DJ

"Hey everybody, my name is Matt and I'm speaking to you on behalf of Expert Village. There's a lot of knobs and sliders in Virtual DJ. I'm going to go over some of the more basic ones. I'm going to go ahead and play what's on my left table. Up here on the top left, this is the master volume control. What this does is it controls the volume of everything including both tables, as well as any loops or samples that might be going on. If you want to control the volume of an individual table, you've got your slider here for your left table, and here for the one on the right. Like I said, that will control the volume of each individual table. You can also adjust the knob (the gain knob) up here for a little more detailed control. You've also got the slider right here, the one here on the left, and the one here on the right. These control the speed of the table. So if you pull it up, that will slow down your table. If you pull it down, it will speed it up. If at anytime you want to put it back in the middle, just double click and that will take it back to its normal speed. You can also click the plus and the minus ( or -) to adjust and fine tune that. You've also got the cross fader here in the middle, and what that does is it fades from the left to the right table. So if you've got both tables playing, if you pull it over to the right it will play just the right table, if you pull it over to the left, it will play just the left table. If you pull it into the center it will be an even mix so you can fade from one to the other."