Setting Up a Relay Box for LED Lights

Video Transcript

"Kyle with Expert Village and today I'm going to be showing you how to use a LED lighting system. So first you put your input from the box and then if you look there you have your output. This is where you're going to send your 2nd signal. Now this is going to go out to your first light. So you have your IN and then you have your OUT. This is going to relay the signal and this is going to provide power specifically for the lights. Also this box is going to be probably far away from your controller box. Your controller box, you could have a 30 or 40 foot cord. If you're sitting at the back of the house you maybe have a 30 foot cord that's going to go in but you may have a 2 foot cord going out because this is going to be hooked right next to your lights. That's why we have hooks here. If you want to get a bungee cord you could easily hook it in and then you will have it right next to your lights."