Adding Bead Two to Square Knot Hemp Bracelet

Video Transcript

"Hi I'm Karen for Expert Village. Now I'm going to place this bead on I'll take my carrier cords again. Now if they are getting fray on the bottom you can either trim them with the scissor. You can trim them with the scissor like that or you can take your bees wax and just rub it. Like that and see how nice and firm you can pinch them together when they have the bees wax on and then it will go right in on your bead. Just slide your bead up and again we'll secure the carrier to our table. We'll take our Knottier threads and their just going come right down like that wrapped around and we'll just start right over. Make your regular loop. This Knottier comes over the first one underneath and diagonally through the loop and just spring that knot right up underneath the bead we did four knots in between this bead and the big bead and we are going to continue with that pattern. Here we go. Up and Through, two, three, four, now we are going to add our next bead I'll take the carriers off again we have already waxed our thread, waxed our cords pinched them together so we can get it into that hole and slide the bead up to the knots rescuer your carriers because it makes it a lot easier to work with just go right around the bead there's a loop, up under and through take the know up nice and evenly and we'll continue on until we get to the end"