Adding a Face to a Stuffed Animal

Video Transcript

"Hi, I'm Karen for Expert Village. Now we are going to mark and embroider the faces for our bears. You want to take only one side of the bear and you want to make sure it is the outside of the fabric the part the part that is going to be on the outside. You are going to set aside one of them and then on the other one you want to mark the faces of both of the bears. On one side. So take a light marking pen and remember when you mark on the outside of the fabric if does not rub off you know you are going to be able to see it. So you want to use something light or something you know would wash off. So from the center of the top of the head you want to measure down two inches and just put a pin in there. Just sticking out like that. Just to mark that spot. Then from there you want to measure/put the pin at three quarter mark of the ruler. Then just very small dot just so you know where the eye belongs. Then again three quarters of a inch on this side of the pin and three quarters of inch down from it. That would mark the nose the beginning of the nose. So you should have three very light markings to show the eyes and the nose. Then turn it over so you have the other bears head and repeat that with the center. Starting from the center top of the head. You put a pin at two inches and then mark three quarters of a inch on either side of the pin for the two eyes. One at three quarters of a inch down from the pin for the nose. That is what it should look like. "