How to Make Eye Holes for Hobby Horse

Video Transcript

"Hi I'm Karen for Expert Village. Now we are going to turn it right side out. Then we would be putting the eyes in there. Oops I have pin in there let me take that out. Just put your hand in and let me grab the tip of the nose and put it out like you are putting a sock on. It looks great! Now you can put your hand in and just push out that nose section to make sure it is out good. Next, I want to place the eyes on there this is the yarn mane it is nice fully yarn mane. This is the fleecy mane that is how that looks. Now for the eyes a good placement for the side of the head and if you want to place it just a little bit down from where the mane starts. You can use your own judgment to where to put the eyes. I'm going to place them right here and for these eyes that you buy at the store we just put a hole. In this case, we would just put a hole that goes through both sides. Just take your scissors and pierce right through. I need a sharper scissor okay I would just wiggle it. You don't want to tear it to much you just want to get a hole so that is why I'm just wiggling back and forth. Not putting to much pressure. If I jam it right in, I would end up making to big of a hole; you just want a little bit of a hole. So I just want to wiggle the scissors to it until it comes out the other end. I have a nice little hole and it would be even on both sides of the horse because I put it right through. "