Remove Screw to Plug Holes in Furniture

Video Transcript

"Ok. I've installed a counter sinking bit into my drill. This has a pre drill hole, which you need when you're going to put the screw back in. We want to have a nice hole for the screw to go in. And, this part of the tool is shaped like the end of the screw. And, when you drive it in it makes a nice little seat for the screw to snug down into. So, we're going to begin by taking out the screw that's in the chair already. I'm going to do this by hand first with my little ratcheting screwdriver. And, we'll back that screw out. Ok. We have the screw out now. The next step is going to be, to counter sink this hole. We want to put the drill right in there. And, since we already have a hole you want to try to be as close to the center as possible. And, just push the counter sink in. And, check your hole. See that the plug fits. It does, we'll probably have to go in just a little deeper. There we go."