How to Install Hold for Keyless Entry Deadbolt

Video Transcript

"Hi! This is Daniel on behalf of Expert Village. In this clip part 2 of installing the deadbolt, we are going to install the back portion and the two screws that hold the deadbolt in place. Once you've got the deadbolt installed on the outside, simply insert this so that it is flush and that your tail piece needs to go through the center hole. You want to be very careful not to pinch your power cord. If you do, the lock of course is not going to function. Once you've got that lined up, simply thread the screws through. If you have to, you can look through the back side and make sure you got plenty of room and everything lines up. I always use the first bolt to hold onto the lock while I thread the second one. Don't tighten both of these screws too tight until you've checked on the back side to make sure that the front portion of the lock is square and is sitting flush. Go ahead and tighten it down and you are done. "