Remove Lower Portion of Pool Vac Ultra

Video Transcript

"Sometimes over years it becomes necessary to go in and repair major parts of the cleaner. Double check that they are working properly and replace them if necessary. Now we are going to show you how to remove the lower compartment to expose the turbine and the A frame assembly. The first thing you want to do is remove the cover assembly. Remember to keep your drill set on the lowest torque setting so that it doesn't destroy the unit and then you are going to find four bulbs and it will hold one, two, three and four and we are going to remove those. Obviously it is a lot easier to use the screw gun and make sure that you have one with a little bit of a reach like this. These with the removable heads are nice and this turns out to be a quarter inch nut driver and this is something we will get to later in the Pool Vac Ultra but unlimited reach goes a long way. Now while keeping track of your screws we will just gently wiggle and we get to see the innards, the heart and soul of the Pool Vac Ultra and in a minute we will show you how to repair some of these."